Click image to view full size image
MDRS-CAP
Polyolefin Heat Shrink End Cap
Description
MDRS-CAP Heat shrink cable end caps, with flat adhesive coating inside, are typically used to seal cable terminals against moisture etc.
Features
² Good sealing, waterproof, moisture proof
² Ultraviolet resistant and weather resistance
² RoHS compliant
² Continuous Operating Temperature: -55°C~110°C
² Shrink Temperature: 120°C
² Standard colors: Black
Technical Data
Structure
Dimension
Polyolefin Heat Shrink End Cap
Description
MDRS-CAP Heat shrink cable end caps, with flat adhesive coating inside, are typically used to seal cable terminals against moisture etc.
Features
² Good sealing, waterproof, moisture proof
² Ultraviolet resistant and weather resistance
² RoHS compliant
² Continuous Operating Temperature: -55°C~110°C
² Shrink Temperature: 120°C
² Standard colors: Black
Technical Data
Structure
Dimension
| Test Properties | Test Method | Typical Data |
| Tensile Strength | ASTM D 2671 | ≥11Mpa |
| Elongation at break | ASTM D 2671 | ≥400% |
| Density | ASTM D 792 | 1.05g/cbm |
| Elongation after heat ageing | 150°C, 168h | ≥300% |
| Dielectric Strength | IEC 243 | ≥15KV/mm |
| Volume Resistivity | IEC 93 | ≥10^14Ω.cm |
| Size(mm) | Supplied ID(mm) | Length (±10%) | Length of adhesive (±10%) | Size after shrink | |
| ID(mm) | Thickness wall(mm) | ||||
| Standard Type | |||||
| Φ12/4 | 12 | 40 | 15 | 4 | 2.6 |
| Φ14/5 | 14 | 45 | 18 | 5 | 2.2 |
| Φ20/6 | 20 | 55 | 25 | 6 | 2.8 |
| Φ25/8.5 | 25 | 68 | 30 | 8.5 | 2.8 |
| Φ35/16 | 35 | 83 | 35 | 16 | 3.3 |
| Φ40/15 | 40 | 90 | 40 | 16 | 3.3 |
| Φ55/26 | 55 | 103 | 50 | 26 | 3.5 |
| Φ75/36 | 75 | 120 | 55 | 36 | 4 |
| Φ100/52 | 100 | 140 | 70 | 52 | 4 |
| Φ120/60 | 120 | 150 | 70 | 60 | 4 |
| Φ145/60 | 145 | 150 | 70 | 60 | 4 |
| Φ160/82 | 160 | 150 | 70 | 82 | 4.2 |
| Φ200/90 | 200 | 160 | 70 | 90 | 4.2 |
| Stretched Type | |||||
| Φ14/5 | 14 | 55 | 30 | 5 | 2.2 |
| Φ42/15 | 42 | 110 | 40 | 15 | 3.3 |
| Φ55/23 | 55 | 140 | 70 | 23 | 3.8 |
| Φ62/23 | 62 | 140 | 70 | 23 | 3.8 |
| Φ75/32 | 75 | 150 | 70 | 32 | 4 |
| Φ75/36 | 75 | 170 | 70 | 36 | 4.2 |
| Φ105/45 | 105 | 150 | 65 | 45 | 4 |